Specifications: Process
Flowmeter MODEL: MMF709
|
FLOWTUBE Meter Size: 3/8”NB-24”NB (10mm- 600mm) Media Pressure
3/8”(25mm)– 3”(80mm) : PN40 10”(250mm)– 24”(600mm): PN10 Please specify if required otherwise.
0-150 ° C, Separate Version Neoprene Liner: 0-90 ° C Other liner: Consult Factory Media conductivity: 10 µ S/ cm (minimum) Materials PTFE /Neoprene / Polyurethene SS 316 / other please specify SS 304/ SS316 non-magnetic Carbon steel /SS 304/ SS 316 Coil housing: CS(Epoxy painted) / SS Transmitter: Cast aluminum(LM25) Epoxy painted Process Connection: Flanged
IS / DIN / ANSI / specify any other Ambient temperature range: 0 –50oC Microprocessor
Based Converter
a.With
Communication
b.Without
Communication
Specify
protocol:
RS232/RS485/Modem/any
other |
FLOW TRANSMITTER / CONVERTER Power Supply: 240 V /110 V AC , 50/60 Hz, ± 15 % Power consumption: 20 VA approx. Signal output: 0/4-20 mADC (isolated) Time constant: 4.5S Fixed/1-20S adjustable, optional Pulse output: a.Output to drive external electromagnetic
counter of 12 V/24 V DC directly, 10-18000 pulse/hour b.Open collector output (max 40 V) 0-500 Hz/1 KHz/10 (open collector) 5 V or 15 V
Maximum load resistance: 1000 ohm (output compliance 20 V) Local display: 3½ digit LCD (optional) in specified engineering Units & two resolutions Ingress protection: IP 65 standard, IP 67 / IP 68 on request Flow velocity range: 0.5 m/s to 10 m/s (full scale) Accuracy: at reference condition
± 0.5% of flow rate Flow between 20%-100%: ± 1% of actual flow Flow between 0- 20%: ± 0.2% of full scale (at normal condition) Repeatability: ± 0.15% of span Effect of ambient temperature: < ± 0.2% per 10 oC Effect of power supply: < ± 0.1% per 10% voltage change Effe ct of load resistance: < ± 0.1% of span per 100 ohm |
| Download This Page |